# Unit of measurement

This article needs additional citations for verification. (June 2019) |

A **unit of measurement** is a definite magnitude of a quantity, defined and adopted by convention or by law, that is used as a standard for measurement of the same kind of quantity.^{[1]} Any other quantity of that kind can be expressed as a multiple of the unit of measurement.^{[2]}

For example, a length is a physical quantity. The metre (symbol m) is a unit of length that represents a definite predetermined length. For instance, when referencing "10 metres" (or 10 m), what is actually meant is 10 times the definite predetermined length called "metre".

The definition, agreement, and practical use of units of measurement have played a crucial role in human endeavour from early ages up to the present. A multitude of systems of units used to be very common. Now there is a global standard, the International System of Units (SI), the modern form of the metric system.

In trade, **weights and measures** are often a subject of governmental regulation, to ensure fairness and transparency. The International Bureau of Weights and Measures (BIPM) is tasked with ensuring worldwide uniformity of measurements and their traceability to the International System of Units (SI).

Metrology is the science of developing nationally and internationally accepted units of measurement.

In physics and metrology, units are standards for measurement of physical quantities that need clear definitions to be useful. Reproducibility of experimental results is central to the scientific method. A standard system of units facilitates this. Scientific systems of units are a refinement of the concept of weights and measures historically developed for commercial purposes.^{[3]}

Science, medicine, and engineering often use larger and smaller units of measurement than those used in everyday life. The judicious selection of the units of measurement can aid researchers in problem solving (see, for example, dimensional analysis).

In the social sciences, there are no standard units of measurement and the theory and practice of measurement is studied in psychometrics and the theory of conjoint measurement.

## History[edit]

A unit of measurement is a standardized quantity of a physical property, used as a factor to express occurring quantities of that property. Units of measurement were among the earliest tools invented by humans. Primitive societies needed rudimentary measures for many tasks: constructing dwellings of an appropriate size and shape, fashioning clothing, or bartering food or raw materials.

The earliest known uniform systems of measurement seem to have all been created sometime in the 4th and 3rd millennia BC among the ancient peoples of Mesopotamia, Egypt and the Indus Valley, and perhaps also Elam in Persia as well.

Weights and measures are mentioned in the Bible (Leviticus 19:35–36). It is a commandment to be honest and have fair measures.

In the *Magna Carta* of 1215 (The Great Charter) with the seal of King John, put before him by the Barons of England, King John agreed in Clause 35 "There shall be one measure of wine throughout our whole realm, and one measure of ale and one measure of corn—namely, the London quart;—and one width of dyed and russet and hauberk cloths—namely, two ells below the selvage..."

As of the 21st century, multiple unit systems are used all over the world such as the United States Customary System, the Imperial System, and the International System. However, the United States is the only industrialized country that has not yet at least mostly converted to the metric system. The systematic effort to develop a universally acceptable system of units dates back to 1790 when the French National Assembly charged the French Academy of Sciences to come up such a unit system. This system was the precursor to the metric system which was quickly developed in France but did not take on universal acceptance until 1875 when The Metric Convention Treaty was signed by 17 nations. After this treaty was signed, a General Conference of Weights and Measures (CGPM) was established. The CGPM produced the current SI, which was adopted in 1954 at the 10th Conference of Weights and Measures. Currently, the United States is a dual-system society which uses both the SI and the US Customary system.^{[4]}^{[5]}

## Systems of units[edit]

The use of a single unit of measurement for some quantity has obvious drawbacks. For example, it is impractical to use the same unit for the distance between two cities and the length of a needle. Thus, historically they would develop independently. One way to make large numbers or small fractions easier to read, is to use unit prefixes.

At some point in time though, the need to relate the two units might arise, and consequently the need to choose one unit as defining the other or vice versa. For example, an inch could be defined in terms of a barleycorn. A system of measurement is a collection of units of measurement and rules relating them to each other.

As science progressed, a need arose to relate the measurement systems of different quantities, like length and weight and volume. The effort of attempting to relate different traditional systems between each other exposed many inconsistencies, and brought about the development of new units and systems.

The system of units varies from country to country and some of the different system of units are CGS system of units, FPS system of units, MKS system of units and SI system of units. Among the different systems of units used in the world, the most widely used and internationally accepted one is the International System of Units, or SI system of units. The base SI units^{[note 1]} are the second, metre, kilogram, ampere, kelvin, mole and candela. All other SI units can be derived from these base units.^{[note 2]}^{[6]}

Systems of measurement in modern use include the metric system, the imperial system, and United States customary units.

### Traditional systems[edit]

Historically many of the systems of measurement which had been in use were to some extent based on the dimensions of the human body. Such units, which may be called anthropic units, include the cubit, based on the length of the forearm; the pace, based on the length of a stride; and the foot and hand. As a result, units of measure could vary not only from location to location but from person to person. Units not based on the human body could be based on agriculture, as is the case with the furlong and the acre, both based on the amount of land able to be worked by a team of oxen.

### Metric systems[edit]

Metric systems of units have evolved since the adoption of the original metric system in France in 1791. The current international standard metric system is the International System of Units (abbreviated to SI). An important feature of modern systems is standardization. Each unit has a universally recognized size.

Both the imperial units and US customary units derive from earlier English units. Imperial units were mostly used in the British Commonwealth and the former British Empire. US customary units are still the main system of measurement used in the United States outside of science, medicine, many sectors of industry, and some of government and military, and despite Congress having legally authorised metric measure on 28 July 1866.^{[7]} Some steps towards US metrication have been made, particularly the redefinition of basic US and imperial units to derive exactly from SI units. Since the international yard and pound agreement of 1959 the US and imperial inch is now defined as exactly 0.0254 m, and the US and imperial avoirdupois pound is now defined as exactly 0.45359237 kg.^{[8]}

### Natural systems[edit]

While the above systems of units are based on arbitrary unit values, formalised as standards, some unit values occur naturally in science. Systems of units based on these are called natural units. Similar to natural units, atomic units (au) are a convenient system of units of measurement used in atomic physics.

Also a great number of unusual and non-standard units may be encountered. These may include the solar mass (2×10^{30} kg), the megaton (the energy released by detonating one million tons of trinitrotoluene, TNT) and the electronvolt.

### Legal control of weights and measures[edit]

To reduce the incidence of retail fraud, many national statutes have standard definitions of weights and measures that may be used (hence "statute measure"), and these are verified by legal officers.^{[citation needed]}

### Informal comparison to familiar concepts[edit]

In informal settings, a quantity may be described as multiples of that of a familiar entity, which can be easier to contextualize than a value in a formal unit system. For instance, a publication may describe an area in a foreign country as a number of multiples of the area of a region local to the readership. The propensity for certain concepts to be used frequently can give rise to loosely defined "systems" of units.^{[9]}^{[10]}

## Base and derived units[edit]

For most quantities a unit is necessary to communicate values of that physical quantity. For example, conveying to someone a particular length without using some sort of unit is impossible, because a length cannot be described without a reference used to make sense of the value given.

But not all quantities require a unit of their own. Using physical laws, units of quantities can be expressed as combinations of units of other quantities. Thus only a small set of units is required. These units are taken as the *base units* and the other units are *derived units*. Thus base units are the units of the quantities which are independent of other quantities and they are the units of length, mass, time, electric current, temperature, luminous intensity and the amount of substance. Derived units are the units of the quantities which are derived from the base quantities and some of the derived units are the units of speed, work, acceleration, energy, pressure etc.^{[6]}

Different systems of units are based on different choices of a set of related units including fundamental and derived units.

## Physical quantity components[edit]

Following ISO 80000-1,^{[11]} any value or magnitude of a physical quantity is expressed as a comparison to a unit of that quantity. The *value* of a physical quantity *Z* is expressed as the product of a *numerical value* {*Z*} (a pure number) and a unit [*Z*]:

For example, let be "2 metres"; then, is the numerical value and is the unit. Conversely, the numerical value expressed in an arbitrary unit can be obtained as:

*quantity calculus*. In formulas the unit [

*Z*] can be treated as if it were a specific magnitude of a kind of physical dimension: see

*Dimensional analysis*for more on this treatment.

## Dimensional homogeneity[edit]

Units can only be added or subtracted if they are the same type; however units can always be multiplied or divided, as George Gamow used to explain. Let be "2 metres" and "3 seconds", then

- .

A distinction should be made between units and standards.^{[citation needed]} A unit is fixed by its definition and is independent of physical conditions such as temperature. By contrast, a standard is a physical realization of a unit and realizes that unit only under certain physical conditions. For example, a metre is a unit, while a metal bar is a standard. One metre is the same length regardless of temperature, but a metal bar will be exactly one metre long only at a certain temperature.

There are certain rules that have to be used when dealing with units:

- Treat units algebraically. Only add like terms. When a unit is divided by itself, the division yields a unitless one. When two different units are multiplied or divided, the result is a new unit, referred to by the combination of the units. For instance, in SI, the unit of speed is metres per second (m/s). See dimensional analysis. A unit can be multiplied by itself, creating a unit with an exponent (e.g. m
^{2}/s^{2}). Put simply, units obey the laws of indices. (See Exponentiation.) - Some units have special names, however these should be treated like their equivalents. For example, one newton (N) is equivalent to 1 kg⋅m/s
^{2}. Thus a quantity may have several unit designations, for example: the unit for surface tension can be referred to as either N/m (newton per metre) or kg/s^{2}(kilogram per second squared).

## Converting units of measurement[edit]

## Real-world implications[edit]

One example of the importance of agreed units is the failure of the NASA Mars Climate Orbiter, which was accidentally destroyed on a mission to Mars in September 1999 instead of entering orbit due to miscommunications about the value of forces: different computer programs used different units of measurement (newton versus pound force). Considerable amounts of effort, time, and money were wasted.^{[12]}^{[13]}

On 15 April 1999, Korean Air cargo flight 6316 from Shanghai to Seoul was lost due to the crew confusing tower instructions (in metres) and altimeter readings (in feet). Three crew and five people on the ground were killed. Thirty-seven were injured.^{[14]}^{[15]}

In 1983, a Boeing 767 (which thanks to its pilot's gliding skills landed safely and became known as the Gimli Glider) ran out of fuel in mid-flight because of two mistakes in figuring the fuel supply of Air Canada's first aircraft to use metric measurements.^{[16]} This accident was the result of both confusion due to the simultaneous use of metric and Imperial measures and confusion of mass and volume measures.

When planning his journey across the Atlantic Ocean in the 1480s, Columbus mistakenly assumed that the mile referred to in the Arabic estimate of 56⅔ miles for the size of a degree was the same as the actually much shorter Italian mile of 1,480 metres. His estimate for the size of the degree and for the circumference of the Earth was therefore about 25% too small.^{[17]}

## See also[edit]

- GNU Units
- List of humorous units of measurement
- List of obsolete units of measurement
- List of unusual units of measurement
- Measure word
- List of metric units
- Numerical-value equation
- Scottish units
- Seconds pendulum
- Space (punctuation)#Unit symbols and numbers
- System of measurement
- Unified Code for Units of Measure
- United States customary units
- Unit of account
- Units of information

## Notes[edit]

### Explanatory notes[edit]

**^**"The definition of the SI units is established in terms of a set of seven defining constants. The complete system of units can be derived from the fixed values of these defining constants, expressed in the units of the SI."**^**Previous editions had three "supplementary SI units" comprising the radian, steradian and becquerel, which are now included in derived units.

### Citations[edit]

**^**"measurement unit".*International Vocabulary of Metrology – Basic and General Concepts and Associated Terms (VIM)*(PDF) (in English and French) (3rd ed.). Joint Committee for Guides in Metrology. 2008. pp. 6–7. Archived from the original (PDF) on 7 June 2011..**^**"Units of Measurement".*www.ibiblio.org*.**^**"1.3 The Language of Physics: Physical Quantities and Units | Texas Gateway".*www.texasgateway.org*.**^**Yunus A. Çengel; Michael A. Boles (2002).*Thermodynamics: An Engineering Approach*(Eighth ed.). McGraw Hill. p. 996. ISBN 9780073398174.**^**Dodd, Richard (2012).*Using SI Units in Astronomy*. Cambridge University Press. p. 246. doi:10.1017/CBO9781139019798. ISBN 9780521769174.- ^
^{a}^{b}"Measurement in Physics & SI units of Measurement".*HelpYouBetter*. 15 November 2018. Retrieved 15 August 2019. **^**"US Metric Act of 1866". Archived from the original on 10 October 2014. as amended by Public Law 110–69 dated 9 August 2007**^**"NIST Handbook 44 Appendix B". National Institute of Standards and Technology. 2002. Archived from the original on 13 February 2007. Retrieved 18 February 2007.**^**Marsh, David (17 May 2010). "Mind your language: Wales, Belgium and other units of measurement".*the Guardian*. Retrieved 30 August 2018.**^**"Size of Wales".*The Economist*. Retrieved 30 August 2018.**^**"ISO 80000-1:2009(en) Quantities and units — Part 1: General".*iso.org*. Retrieved 12 May 2023.**^**"Unit Mixups". US Metric Association. Archived from the original on 23 September 2010.**^**"Mars Climate Orbiter Mishap Investigation Board Phase I Report" (PDF). NASA. 10 November 1999. Archived from the original (PDF) on 16 March 2011.**^**"Korean Air Flight 6316" (Press release). NTSB. Archived from the original on 6 October 2006.**^**"Korean Air incident". Aviation Safety Net. Archived from the original on 31 July 2013.**^**Witkin, Richard (30 July 1983). "Jet's Fuel Ran Out After Metric Conversion Errors".*The New York Times*. Retrieved 21 August 2007.Air Canada said yesterday that its Boeing 767 jet ran out of fuel in mid-flight last week because of two mistakes in figuring the fuel supply of the airline's first aircraft to use metric measurements. After both engines lost their power, the pilots made what is now thought to be the first successful emergency

*dead stick*landing of a commercial jetliner.**^**Nunn & Edwards 1924, pp. 1–2, 17–18.

## External links[edit]

- Rowlett, Russ (2018) How Many? A Dictionary of Units of Measurement
- NIST Handbook 44,
*Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices* - Official SI website
- Quantity System Framework – Quantity System Library and Calculator for Units Conversions and Quantities predictions
- List of units with selected conversion factors

**Historical**

- "Arithmetic Conventions for Conversion Between Roman [i.e. Ottoman] and Egyptian Measurement" is a manuscript from 1642, in Arabic, which is about units of measurement.
*New International Encyclopedia*. 1905. .

**Legal**

- Ireland – Metrology Act 1996
- Text of the Units of Measurement Regulations 1995 as in force today (including any amendments) within the United Kingdom, from legislation.gov.uk.

**Metric information**

- BIPM (official site)
- The Unified Code for Units of Measure (UCUM)